Veda IF912 (Preliminary)

  1. Scope
  2. Introduction
    1. Overview
    2. General Description
  3. Specification Summary
    1. Processor / SoC / Chipset
    2. Wi-Fi
    3. Bluetooth
    4. Radio Details
    5. Radio Performance
    6. Interfaces
    7. Power
    8. Mechanical
    9. Software
    10. Certifications
    11. Development
  4. Hardware Architecture
    1. Block Diagrams
    2. Pin-Out / Package Layout
    3. Mechanical Drawings
  5. Integration Guidelines
    1. Antenna Integration
    2. Certified Antennas
    3. Host Platform Implementation Details
    4. Surface Mount Conditions
    5. Application Note for Surface Mount Modules
  6. Environmental and Reliability
    1. Environmental Requirements
  7. Regulatory, Qualification & Certifications
    1. Regulatory Approvals
    2. Bluetooth SIG Qualification
    3. Certified Antennas
  8. Ordering Information
  9. Legacy - Revision History
Veda IF912453-00396453-00396-K1453-00396C453-00396R453-00397453-00397C453-00397R

Scope

This document describes key hardware aspects of the Ezurio Veda™ IF912 series wireless modules which is a ultra-lower power, single chip connected MCUs with 1x1 Wi-Fi 6 dual band, Bluetooth® Low Energy 5.4, Matter and IP networking. Integrated MCU, Radio, PMU, Flash and PSRAM in 11x7mm size that targeted at Internet-of- Things (IoT) applications for stand-alone operation or to offload a host-processor.

This document is intended to assist device manufacturers and related parties with the integration of this radio into their host devices. Data in this document is drawn from several sources and includes information found in the Infineon CYW55912 Reversion C 2024-10-30 data sheet, along with other documents provided by Infineon.

Note: The information in this document is subject to change.   Please contact Ezurio to obtain the most recent version of this document.

Introduction

Overview

The Veda IF912 series wireless module is a highly integrated, small form factor Wi-Fi/Bluetooth module that is optimized for low-power mobile devices.

The Veda IF912 integrated with all WLAN and Bluetooth functionality in a small package supports a low cost and simple implementation. The radio is pre-calibrated and integrates the complete transmit/receive RF paths including bandpass filter, diplexer, switches, reference crystal oscillator, and power management units (PMU). It is available in 7x11x1.4mm solder-down LGA form factors with an RF trace pin out for both Wi-Fi and BT.  

A reference certified embedded PCB antenna or the implementation of MHF4 connector for external antennas are available on Veda IF91x DVK, please contact Ezurio for detail information. A list of certified external antennas is shown in Certified Antennas.

Ordering information is listed in Ordering Information. Please contact Ezurio Sales/FAE for further information.

Sign In to Continue