User Guide - OSM Development Kit (Preliminary)

  1. Overview
  2. Ezurio OSM Development Kit Part Numbers
  3. Understanding the Development Board
    1. Block Diagram
    2. Understanding the Development board
    3. Interposer board
    4. BOOT setting
    5. Key function Connectors
  4. Functional Blocks
    1. Power Supply
    2. Buttons
    3. LED
    4. ETHERNET
    5. RGB Display
    6. Rechargeable Battery Support
    7. USB Interface
    8. MIPI DSI
    9. LVDS
    10. Audio
    11. MIPI CSI
    12. CAN BUS
    13. PCIE M.2
    14. SDIO
    15. SPI
    16. RTC power
    17. JTAG
    18. UART
    19. I2C
    20. PWM
    21. MCK
    22. GPIOs
    23. Vendor Defined IO
Carbon AM62 OSM-MFCarbon AM62L OSM-SFCarbon AM67 OSM-MFEZCBC-000-0000-00000-2-K2

Overview

The Ezurio OSM development kit (DVK) is designed to prototype your integrated design using an Ezurio OSM module. The OSM module is soldered on the interposer board, which can connect to the OSM DVK by four 120 pin connectors. The Ezurio OSM DVK provides multiple display interfaces, camera, audio, CAN bus, M.2, Gigabit Ethernet and other hardware options for optimal flexibility and user experience.

This document describes key hardware aspects of the Ezurio OSM Development Kit and is applicable to the DVK PCB with revision R5.0

Ezurio OSM Development Kit Part Numbers

Part NumberProduct Description
EZCBC-000-0000-00000-2-K2OSM Evaluation Kit:
Eval Board / HDMI Adapters / Eval Board / Antennas / Accessories / SOM sold separately

 Understanding the Development Board

Block Diagram

The figure below shows the block diagram of Ezurio OSM Development Kits.

Understanding the Development board

The OSM DVK images identify the locations of these key features and user interfaces (top and bottom view).

Sign In to Continue