User Guide - Nitrogen93 SMARC SOM

  1. In the Box
  2. On the Board
  3. Board Assembly
  4. Serial Console
    1. Connecting USB-To-Serial Converter to Linux
    2. Connecting USB-To-Serial Converter to Windows
    3. Serial Configuration
  5. Building an Image
  6. Programming uSD Card
  7. Programming eMMC
  8. Additional Resources
Nitrogen91 SMARCNitrogen93 SMARCUniversal SMARC CarrierSMARC_CAR

Getting Started

This guide documents how to quickly get up and running with the Ezurio's Nitrogen93 SMARC module and Universal SMARC Carrier.

Note: For instructions on getting started with the Nitrogen93 EVK (EZSMI-935-0216-00158-2-k2), please see the Nitrogen93 EVK Quick Start Guide.

In the Box

The development kit contains the following items:

  • 1x Nitrogen93 SMARC module
  • 1x Universal SMARC Carrier
  • 2x Mounting Screws
  • 1x Power Supply 5V
  • 1x Serial Cable

On the Board

The Nitrogen93 SMARC module and Universal SMARC Carrier contains the following components and interfaces:

  1. Nitrogen93 SMARC module
  2. DSI 0 Display Connector (J13)
  3. LVDS I2C connector - Touch (J23)
  4. LVDS Display Connector (J22)
  5. Barrel Plug Power Adapter (J17)
  6. 3 Pin Molex Connector for Mic (J8)
  7. 3.5mm Audio Jack (J4)
  8. 2 Pin Molex Connector for Line In (J6)
  9. 2 Pin Molex Connector for Speaker Right (J7)
  10. 2 Pin Molex Connector for Speaker Left (J5)
  11. 5 Pin Molex Connector for Can 2 (J20)
  12. 5 Pin Molex Connector for Can 1 (J19)
  13. High-Speed USB-C OTG Connector (J25)
  14. 1x USB-A 2.0 Port (J2)
  15. 6 Pin Molex Connector for Serial (J18)
  16. On/Off Switch (SW2)
  17. Reset Switch (SW1)
  18. Gigabit Ethernet 1 Connector (J32)
  19. Gigabit Ethernet 0 Connector (J31)
  20. Boot Mode Switches (S1)
  21. CSI 0 Connector (J11)
  22. 2x Expansion Connectors (J27 and J28)
  23. M.2 Connector (J15)

  24. Micro SD Card Slot (J26)

Boot mode switches table

Sign In to Continue