User Guide - Nitrogen8M Plus SMARC SOM

  1. Getting Started
  2. In the Box
  3. On the Board
  4. Board Assembly
  5. Serial Console
    1. Connecting USB-To-Serial Converter to Your Host Linux Machine
    2. Serial Configuration
  6. Building A Target Image
  7. Building A Weston Image
  8. Programming micro SD Card
  9. Programming eMMC
  10. Additional Resources
Nitrogen8M Plus SMARCUniversal SMARC CarrierSMARC_CAR

Getting Started

This guide documents how to quickly get up and running with the Ezurio's Nitrogen8M Plus SMARC module and Universal SMARC Carrier.

In the Box

The development kit contains the following items:

  • 1x Nitrogen8M Plus SMARC module
  • 1x Universal SMARC Carrier
  • 2x Mounting Screws
  • 1x Power Supply 5V
  • 1x Serial Cable

On the Board

The Nitrogen8M Plus SMARC module and Universal SMARC Carrier contains the following components and interfaces:

  1. Nitrogen8M Plus SMARC module
  2. SW1 on N95 SMARC module for boot mode bit 0
  3. DSI 0 Display Connector (J13)
  4. LVDS I2C connector - Touch (J23)
  5. DSI 1 Display Connector (J14)
  6. LVDS0 Display Connector (BOM Option) (J21) *
  7. LVDS1 Display Connector (J22)
  8. Barrel Plug Power Adapter (J17)
  9. 3.5mm Audio Jack (J4)
  10. 3 Pin Molex Connector for Mic (J8)
  11. 2 Pin Molex Connector for Line In (J6)
  12. 2 Pin Molex Connector for Speaker Right (J7)
  13. 2 Pin Molex Connector for Speaker Left (J5)
  14. 5 Pin Molex Connector for Can 2 (J20)
  15. 5 Pin Molex Connector for Can 1 (J19)
  16. 6 Pin Molex Connector for Serial (J18)
  17. 2x USB-A 3.1 Gen1 Port (J24)
  18. High-Speed USB-C OTG Connector (J25)
  19. 1x USB-A 2.0 Port (J2)
  20. Gigabit Ethernet 1 Connector (J32)
  21. Gigabit Ethernet 0 Connector (J31)
  22. Boot Mode Switches (S1)
  23. CSI 0 Connector (J11)
  24. On/Off Switch (SW2)
  25. Reset Switch (SW1)
  26. 2x Expansion Connectors (J27 and J28)
  27. M.2 Connector (J15)
  28. CSI 1 Connector (BOM Option) (J10) *
  29. Micro SD Card Slot (J26)
  30. RTC Battery
  31. EDP0 (J3)
  32. EDP1 (J9)
  33. EDP_PWR (J33)

Boot mode switches table

*S1 on SMARC carrier is labeled as (22) in the graphic above.
*SW1 on the N95 SMARC module is labeled as (2) in the graphic above.

Sign In to Continue