LT1110

  1. Datasheet
  2. Product Brief
  3. Documentation
  4. Application Note
  5. Software
  6. Certification
  7. FAQs
PRM240

Datasheet

Datasheet (HIG) - LT1110 ModuleSep 2024

Product Brief

Product Brief - LT1110Sep 2024

Documentation

User Guide - LT1110 ModuleAug 2024
EOL - RAMP - Nov-15-2015Aug 2024
LT1110 Release Notes - version 5.8-0Aug 2024
Configuration and Test Utility Software - RAMP ModulesJul 2024
EOL Notice - PRM240-0x - August 2024Aug 2024

Application Note

Application Note - Enabling the Security Pane in the RAMP Configuration UtilityAug 2024
Application Note - Repeater Set-upAug 2024
Timing Compatibility with Mixed Firmware VersionsAug 2024
Application Note - Updating USB Serial Drivers for RAMP ProductsJul 2024

Software

CONN-RN-LT1110 v5 8-0Aug 2024
LT1110 v5.8-0.zipJan 2019
Release Notes - LT1110 Firmware v5.6-0Aug 2024
LT1110 v5.6-0.zipJan 2019

Certification

FCC Grant - LT1110-200Mar 2019
IC Cert - LT1110-200Mar 2019
FCC and IC Test Report - LT1110-200Mar 2019
RoHS 3 - BluetoothMar 2025
RoHS 3 - RAMP ISM ModulesMar 2025

FAQs

Does the RM024 or LT1110 support encryption, if so which encryption protocol is supported?Jun 2023
How many transmit retries should I use in my application and what is the cost associated with more retires?Jan 2023
What can I do to minimize current consumption and optimize battery life in my LT1110/RM024 application?Aug 2022
What is the default UART baud rate for RAMP modules?Mar 2022
Should I used Broadcast mode or Addressed Mode?Dec 2021
With Ezurio RAMP radios, (CL4490/AC4490, CL4790/AC4790, LT1110, RM024) can I implement a design using just TX, RX and Gnd (three-wire interface) for UART?Dec 2021
I am able to test with the Development Kit hardware or ConnexLink Unit connected to my PC, but it does not work in my actual application, why not?Dec 2021
Are your RAMP radios (AC4490/CL4490, AC4790/CL4790, RM024, LT1110) UL Certified for applications in C1D2 Environments?Dec 2021
Can the firmware be updated on the AC4490/CL4490 or AC4790/CL4790 in the field?Dec 2021
I am not achieving the range documented in your manual, why not?Dec 2021
What is Sync-to-Channel and do I need it?Dec 2021
On the RAMP radios, what is the difference between "Broadcast Attempts" and "Max Transmission Retires"?Dec 2021
How do I return my ConnexLink Radio, AC4490/AC4790, RM024, LT1110 radio to its default settings, can I use Show Defaults?Dec 2021
Which Antennas can be used with the CL4490, CL4790, AC4490, AC4790, RM024, or LT1110?Dec 2021
How do I return my ConnexLink Radio, AC4490/AC4790, RM024, LT1110 radio to its default settings?Nov 2021
Can I choose an RF Channel that is outside of Wi-Fi interference on the RAMP radios?Apr 2021
Can I get true full duplex operation from the RAMP products (RM024, AC4490, AC4790, LT1110, CL4490, CL4790)?Apr 2021
Do any of the RAMP products support XON-XOFF?Jul 2020