/filters:background_color(white)/2026-05/Wi-Fi%206-7%20Thumbnail.png)
How Does Wi-Fi 7 Compare to Wi-Fi 6 & 6E?
Wi-Fi 7 (IEEE 802.11be), the latest generation of Wi-Fi, builds on the foundation of Wi-Fi 6 and Wi-Fi 6E with major improvements in speed, latency, capacity, and efficiency. All three are part of...
Interoperability
-
-
/filters:background_color(white)/2025-01/453-00001-K1-md.png)
Achieving 3.3 Mbps Throughput with ESB on the BL54L15: Beyond BLE Limits
If you have ever tried to stream high-rate sensor data over Bluetooth Low Energy, you know the frustration: the 2 Mbps PHY sounds fast on paper, but once you factor in connection intervals, L2CAP...
-
/filters:background_color(white)/2024-03/security-center1.png)
What is a Cryptographic Module?
In our hyper-connected world, cryptographic modules are the hidden workhorses keeping our data safe. Consider that by 2025, an estimated 463 exabytes of data will be created globally every day...
-
/filters:background_color(white)/2024-07/sget-osm-modules-sizes-contacts-web.png)
Open Standard Modules (OSM): Fueling the Future of Wireless Embedded Systems
Embedded engineers today face a dilemma: how to add more computing and connectivity into ever-smaller devices without reinventing the wheel each time. Open Standard Modules (OSM) have emerged as a...
-
/filters:background_color(white)/2025-03/Canopi-logo-red.png)
Canopi: How Our System-on-Modules Include Everything We Do
Ezurio is your connectivity expert. It’s baked into everything we do. And Canopi is how all that expertise comes together to supercharge your SOM and SBC designs.
-
/filters:background_color(white)/2020-02/Isometric---5G-Antenna-Smart-City.png)
Understanding Edge IoT Computing
Edge computing addresses these challenges by processing data closer to where it's created, often at or near the sensor level.
-
/filters:background_color(white)/2025-02/fips_compliance_a.png)
FIPS Compliance: A Practical Guide for Your Organization
This article will explain the significance of FIPS, both for federal agencies and private organizations.
-
/filters:background_color(white)/2024-10/Medical%20Megatrend%20case%20study.png)
Connected Healthcare Growing Pains: Next-Gen Trends and Solutions
As connected healthcare devices play a vital role in patient care, medical facilities face challenges in integrating next-gen technologies into their existing infrastructures.
-
/filters:background_color(white)/2024-09/whats_new_in_bluetooth_6.png)
Bluetooth 6: What's New In The Latest Bluetooth Release?
Bluetooth technology is constantly growing, not only enhancing existing applications but also enabling entirely new use cases through performance improvements and expanded feature sets. On September 3, 2024, the Bluetooth Special Interest Group (SIG) unveiled the latest version of the Bluetooth Core Specification: Bluetooth 6.0.
-
/filters:background_color(white)/2024-09/Medical%20IoT%20devices.png)
How Connected Medical Devices Are Revolutionizing Modern Healthcare
Discover how connected medical devices, also known as smart medical devices, are shaping the future of healthcare with real-time data and data-driven decision making.
-
/filters:background_color(white)/2024-07/summit-hero.png)
Unpacking the Summit Suite: Solving the Biggest Security Problems for Teams of All Sizes
Our Summit Suite helps customers ensure total device security, vulnerability monitoring and remediation, and FIPS encryption on select Ezurio devices. Here’s how we help businesses big and small leverage our extensive security development.
-
/filters:background_color(white)/2022-12/Bluetooth-logo.png)
The Latest Bluetooth SIG Qualification Process is Official – Here’s What You Need to Know
The first update to the Bluetooth qualification process in a decade took effect July 1, 2024. Here’s what’s changed for manufacturers seeking a qualified design.
-
/filters:background_color(white)/2024-03/Sera-NX040-750-03372-front-marking-added.png)
An Overview of IoT Modules
IoT modules incorporate various wireless technologies, such as Wi-Fi, Bluetooth, LoRaWAN, UWB, Zigbee, and cellular(2G/3G/4G/5G), to facilitate seamless data exchange between IoT devices and networks.
-
/filters:background_color(white)/2024-06/Smart%20City%20Blog%20Nitrogen93%20Image.png)
Navigating the Future of Smart Cities with the Nitrogen93 SMARC
Smart cities optimize daily life through connected IoT devices, but reliable connectivity, data security, and interoperability pose a challenge to create a smooth, interconnected network.
-
/filters:background_color(white)/2023-09/BT%20vs%20LoRaWAN.png)
Designing for the IoT: How to Choose Between Bluetooth and LoRaWAN
Wireless technologies all have their own unique features and advantages as well as limitations. Choosing the right standard is about really understanding what your application needs, as well as what it doesn’t.
-
/filters:background_color(white)/2024-03/8MP_SMARC-RENDER.on%20end.png)
What Is The SMARC Standard and What It Can Do For Your Design
In this first of a series of blog posts, we discuss various aspects of the SMARC standard, a critical component of our SOM portfolio, and what it means for our customers.
-
What’s New in Bluetooth 5.4?
In this post, we’ll discuss the most significant points of each feature of the specification including the upcoming Electronic Shelf Label (ESL) Profile.
-
/filters:background_color(white)/2022-12/food-logistics-2022-award.jpg)
Ezurio Named 2022 Top Software and Technology Provider by Food Logistics
Our work with Zenput on their temperature monitoring solution put us in company with providers that help power through the world’s food safety challenges.
-
/filters:background_color(white)/2020-04/red-signal-01.png)
The Pitfalls of Poor Wi-Fi Connectivity
Introduction When it comes to the Wi-Fi component of a new product design, customers have a wide range of choices from various manufacturers. The product portfolio available from those...
-
/filters:background_color(white)/2024-12/mFlexPIFA-standalone-transparent.png)
3 Reasons to Choose Embedded Connectivity for Your Design
Wireless Inside – An Approach with Countless Benefits Wireless connectivity is increasingly an absolute requirement in new products across every industry. The applications of the...
-
/filters:background_color(white)/2025-01/60-Som-Security.png)
A Closer Look at the Chain of Trust Security Architecture: Wi-Fi Certification, Authentication Support & FIPS 140-2 Turbo
Building off of our last post which covered Provisioning and Secure Boot , this week we’re taking a closer look at Wi-Fi Certification, Authentication Support, and FIPS 140-2 Turbo. ...
-
/filters:background_color(white)/2025-03/Whitepaper%20-%20Zigbee-vs.-6LoWPAN.jpg)
Zigbee vs. 6LoWPAN for sensor networks
Arguably, ZigBee is the most popular low-cost, low-power wireless mesh networking standard available today. Just go to the ZigBee alliance web page and you’ll get a good picture of companies...
-
/filters:background_color(white)/404.png?article_icon)
FCC Requirements for Medical Body Area Networks
Medical Body Area Networks: Rules and Regulations Written By: Bob Buckiewicz Bob is the Director of Hardware Development at LS Research. He has over 30 years of experience in the development of...
-
/filters:background_color(white)/2025-03/whitepaper-secure-medial-communications1.png)
Securing Your Medical Device Starts with a Secure Communications Module
In today’s technological landscape, securing your device is an increasingly complex goal that requires more comprehensive approaches. The best and most effective approaches to device security...
-
How to Test a Wi-Fi Embedded Medical Device
Hospitals are one of the most compelling, yet difficult RF environments. To ensure reliable functionality, a Wi-Fi radio that is embedded in a medical device must be tested thoroughly.When choosing...
-
How to Test a Wi-Fi Embedded Medical Device
Hospitals are one of the most compelling, yet difficult RF environments. To ensure reliable functionality, a Wi-Fi radio that is embedded in a medical device must be tested thoroughly.When choosing...
-
/filters:background_color(white)/s3fs-public/2018-10/The-Connected-Hospital.png)
Wi-Fi Healthcare Services to Grow in 2016- Drives Connected Hospital
In Connected Hospitals , wireless technology allows caregivers and patients to roam around the hospital freely while providing accurate and timely monitoring. Through successful wireless medical...
-
/filters:background_color(white)/s3fs-public/2018-10/wireless-test-beds-workshop-logo.jpg)
FCC and FDA Wireless Test Beds Workshop Recap
Last week, the FCC and FDA teamed up to host a joint workshop called "Promoting Medical Technology Innovation - The Role of Wireless Test Beds". The workshop discussed key topics such as the role of...
-
/filters:background_color(white)/s3fs-public/2018-10/LoRa-Alliance-Logo-150x150.png)
Laird Partners with LoRa Alliance
Today Laird announced its partnership with the LoRa Alliance at Mobile World Congress ’15. The LoRa Alliance is the largest, most powerful consolidated effort by industry leaders to enable the...
-
Can the Internet of Things be Regulated?
By Natalie Sheerer, Marketing Communications Specialist By 2020 the Internet of Things (IoT) will be worth approximately $7 trillion with billions of connected gadgets, devices, and appliances...
-
The Connected Hospital Benefits Both Patients and Staff [Infographic]
What is the Connected Hospital and what does it mean for both patients and staff? The Connected Hospital is a vision of the future that will take place within the next 20 years, and stems from...
-
Speed Up Integration and Development Testing with the BT830
Embedded Wireless Solutions of Laird continues to make wireless development even easier with last week’s launch of the BT830 Series. The BT830 Series of UART HCI modules brings support for...
-
Testing Wi-Fi Functionality in Medical Devices
Testing RF Performance in Hospitals By Stephanie Lubrano, Marketing Communications Specialist Laird's article, Testing Wi-Fi Functionality in Medical Devices , written by Natalie Sheerer, was...
-
/filters:background_color(white)/s3fs-public/2018-10/dr-nurse-slideshow1.png)
Laird Publishes White Paper on Testing Wi-Fi Functionality in the Medical Devices Market
November 26, 2013 -- Laird, a global technology company, today announced the release of a new white paper discussing the importance of testing Wi-Fi functionality for medical devices. The white...
-
Laird to Present on Benefits of Bluetooth Low Energy for Medical Devices
Expert to speak at fifth annual Medical Device Connectivity Conference November 5, 2013 – Laird, a global technology company, announced that one of their Wireless technology experts will...
-
EMC Testing: The New Legislative Framework for the EU
The European Union (EU) has assembled regulations and decisions, known as the New Legislative Framework (NLF), with the primary tasks of improving market surveillance, improving the quality of...
-
Laird Technologies Releases New WPC39S0B-001 Wideband/Lowband Land Mobile Radio VHF Antenna
New Wideband/Lowband Antenna Delivers High Performance in Mission Critical Situations St. Louis, Missouri, USA – August 2, 2011 – Laird Technologies, Inc., a global leader in the design and...
-
Laird Technologies Announces Groundbreaking Bluetooth® Modules for Medical Products
New range of modules removes complexity and delivers the latest Bluetooth features for medical device manufacturers who require Health Device Profile. St. Louis, Missouri, USA – November 17,...